EU Battery Removability Derogations: Wearables Added
EU Battery Removability Derogations: Regulation 2026/1770 Adds Wearables, Toys and Six More Product Groups
The EU battery removability derogations have been widened. Commission Delegated Regulation (EU) 2026/1770, adopted on 14 July 2026 and published in the Official Journal on 22 October 2026, replaces Article 11(2) of the Batteries Regulation (EU) 2023/1542. It entered into force on 11 November 2026, three months before the removability rules start to apply on 18 February 2027.
Background: Article 11 and the 2027 removability rule
From 18 February 2027, anyone placing a product with a portable battery on the EU market must make sure the end-user can remove and replace that battery at any time during the product's life. A battery counts as "readily removable" if commercially available tools are enough. Specialised or proprietary tools (unless supplied free with the product), heat or solvents don't qualify. Products also need instructions and safety information on battery removal and replacement, kept permanently online.
The original Article 11(2) allowed only two exceptions, where replacement by an independent professional was enough: appliances designed for wet environments that are washable or rinseable, and professional medical imaging, radiotherapy and in vitro diagnostic devices. Article 11(4) lets the Commission add more products by delegated act, and 2026/1770 is the first time it has done so.

Key Changes in the EU Battery Removability Derogations
The new Article 11(2) lists eight product groups that may be designed so the battery is removable and replaceable only by independent professionals.
(a) Wet appliances, now explicitly including wearable devices, that work mainly in environments with splashing water, water streams or immersion and are meant to be washable or rinseable.
(b) Professional medical imaging and radiotherapy devices and in vitro diagnostic medical devices (unchanged).
(c) Wearable devices whose safety, durability or water resistance could suffer if users opened the battery compartment, and which are too small for a safe user replacement or rely on a compact sealed enclosure against dust and shock.
(d) Electric toys with rechargeable batteries, where needed for the toy's safety, until 31 July 2030. From 1 August 2030 the new Toy Safety Regulation (EU) 2025/2509 takes over.
(e) Wireless thermometer probes designed for food contact during food preparation.
(f) Products within the scope of the ATEX Directive 2014/34/EU.
(g) On-body delivery systems for subcutaneous medication.
(h) Telematics devices for roof mounting on agricultural and construction machinery, exposed to vibration, dust and wet conditions.
The safety condition used to cover point (a) only. It now applies to (a) and (c) to (h): the derogation can be used only where it's required for the safety of the user and the appliance. Medical imaging and IVD devices under (b) remain unconditional.
What This Means for Manufacturers
Smartwatches, fitness trackers, smart glasses and other wearables have a clear route to sealed designs, but only with a documented safety, durability or water-resistance reason.
The derogation doesn't remove the battery obligation. The battery still has to be removable and replaceable by an independent professional.
Toy makers get a temporary derogation that ends on 31 July 2030, so long-life toy designs should plan for the Toy Safety Regulation rules from 2030.
Products outside the eight groups still need user-replaceable batteries from 18 February 2027, so the product classification decision matters.
Technical files should explain why a product falls within a derogation and why the safety condition is met, in case a market surveillance authority asks.
Certification Impact Summary
Area | Before | After | Impact level |
Number of derogations | Two (wet appliances; medical imaging and IVD) | Eight product groups | High |
Wearables | Covered only if washable or rinseable wet appliances | Covered as wet appliances, or as small or sealed wearables under (c) | High |
Electric toys | No derogation | Derogation until 31 July 2030 where needed for safety | Medium |
Specialist products | No derogation | Food thermometer probes, ATEX products, on-body delivery systems, machinery telematics | Medium |
Safety condition | Applied to point (a) only | Applies to (a) and (c)-(h) | Medium |
Date of application | Article 11 from 18 February 2027 | Unchanged | Low |
Timeline and Required Actions
Key Dates
Date | Milestone |
14 July 2026 | Commission adopts Delegated Regulation (EU) 2026/1770 |
22 October 2026 | Published in the Official Journal |
11 November 2026 | Enters into force |
18 February 2027 | Article 11 removability and replaceability rules apply |
31 July 2030 | Temporary derogation for electric toys ends |
Required Actions for Manufacturers
List every EU product that incorporates a portable battery and note how the battery is removed today.
Check each product against the eight derogation groups in the new Article 11(2).
For products relying on (a) or (c) to (h), write down the safety reason that justifies professional-only replacement.
Redesign products that don't qualify so users can replace the battery with commercially available tools.
Prepare the online instructions and safety information on battery removal and replacement.
Toy makers should plan designs that meet the Toy Safety Regulation from 1 August 2030.
Conclusion
Regulation 2026/1770 gives wearables and several specialist product groups a legal basis for sealed batteries, but it's a conditional exception, not a blanket exemption. With 18 February 2027 three months away, manufacturers should settle their product classifications and supporting evidence now. Contact our team for support with EU battery and product compliance.
