top of page

CPSC Reese's Law UL 4200A-2026: Rule from Feb 2027

14 hours ago
3 min read

CPSC Reese's Law UL 4200A-2026: Button and Coin Battery Warning Label Update Takes Effect February 2027


CPSC Reese's Law UL 4200A-2026 is the new reference for consumer products that contain button cell or coin batteries. On 18 November 2026, the U.S. Consumer Product Safety Commission (CPSC) published a direct final rule updating 16 CFR Part 1263 to the July 2026 edition of the standard. It takes effect on 13 February 2027, unless CPSC receives a significant adverse comment by 18 December 2026.


Background: how Reese's Law updates work


Reese's Law protects children aged six and under from swallowing button cell and coin batteries. In September 2023, CPSC found that ANSI/UL 4200A-2023 met the law's performance and labeling requirements and made it the mandatory standard in Part 1263.

The law also sets how updates happen. When the standards body revises the standard and notifies CPSC, the revision becomes mandatory 180 days later unless CPSC rejects it. UL Standards and Engagement published UL 4200A-2026 on 22 July 2026 and notified CPSC on 17 August 2026. CPSC asked for comments on 3 September 2026 and received 37. It concluded the revision improves safety and voted 3-0 to publish the rule.


Infographic summarizing the CPSC Reese's Law UL 4200A-2026 update effective February 13, 2027, comparing the older smaller safety alert symbol against the updated larger symbol at least as tall as the word "WARNING" alongside key regulatory dates.

Key Changes in the CPSC Reese's Law UL 4200A-2026 Update


Bigger Safety Alert Symbol

The packaging and product warnings in Figures 7B.1, 7B.2, 7B.3, 7B.4 and 7C.1 now show the Safety Alert Symbol at least as tall as the signal word "WARNING". Before, it was slightly smaller. CPSC says this aligns with ANSI Z535.4, section 6.3.


Molded and stamped marks

Section 7C.2 covers the alternative product marking, which combines the Safety Alert Symbol with a button or coin cell symbol. The 2026 edition makes clear that when this mark is molded or stamped into the product, it can be the same colour as the part. On multi-colour printed labels, the colour shown in the figure still applies. Every warning must stay prominent, legible and permanent.


What doesn't change

Tests, test equipment and test protocols are the same. Labs accepted by CPSC for UL 4200A-2023 are treated as competent for the 2026 edition, and the existing notice of requirements stays in place.


What This Means for Manufacturers


  • Packaging and product warning artwork needs the larger Safety Alert Symbol for products manufactured after 13 February 2027.

  • Products with molded or stamped battery warnings get more design freedom, as single-colour marks are now expressly allowed.

  • No retesting is needed for the standard change itself, because the tests are unchanged.

  • Children's Product Certificates and General Certificates of Conformity should cite UL 4200A-2026 for production after the effective date.

  • Children's products still need third-party testing by a CPSC-accepted lab. Other products can certify on a test of each product or a reasonable testing program.


Certification Impact Summary


Area

Before

After

Impact level

Mandatory standard (16 CFR 1263.3)

ANSI/UL 4200A-2023

ANSI/UL 4200A-2026

Medium

Safety Alert Symbol in warnings

Slightly smaller than "WARNING"

At least as tall as "WARNING"

Medium

Molded or stamped product mark

Not directly addressed

Same colour as the part allowed

Low

Tests and protocols

UL 4200A-2023 tests

Unchanged

Low

Accepted test labs

Accepted for 2023 edition

Treated as competent for 2026 edition

Low

Certificates

Cite UL 4200A-2023

Cite UL 4200A-2026 for production after 13 February 2027

Medium


Timeline and Required Actions


Key Dates

Date

Milestone

22 July 2026

UL 4200A-2026 published

17 August 2026

ULSE notifies CPSC of the revision

3 September 2026

CPSC notice of availability (91 FR 56604)

18 November 2026

Direct final rule published (91 FR 74086)

18 December 2026

Deadline for significant adverse comments

13 February 2027

UL 4200A-2026 becomes the mandatory standard


Required Actions for Manufacturers


  1. List products sold in the US that contain button cell or coin batteries.

  2. Update packaging, product and literature warnings to the new symbol size.

  3. Check molded or stamped marks against the clarified section 7C.2.

  4. Plan the artwork switch so production after 13 February 2027 uses it.

  5. Update certificates to cite UL 4200A-2026.

  6. Watch the Federal Register for a withdrawal notice after 18 December 2026.


Conclusion


The CPSC Reese's Law UL 4200A-2026 update is mainly a labeling change, but it touches every product with a button or coin battery. Updating artwork and certificates before 13 February 2027 keeps production on track. We can help you review warnings and certificates for the US market. Contact us at contact@gmalabs.com.


bottom of page